Dovpo introduces the M VV 300W Box Mod, a 300W capable, dual 18650 battery (sold separately), potentiometer controlled box mod. The device has a 1.0 to 8.0V output voltage with a 35A maximum current output and features a no screen display. The M VV Box Mod features a single firing button and an LED battery life indicator light alongside reverse polarity protection, low voltage, overheat and over current protection. The M VV Box Mod comes in four different colors; red, black, and blue with a crackle design, and one in special edition. With its high power capability, the M VV Box Mod is an ideal device for all rebuildable atomizers.
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of three. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
Product Features: 300W Capable 1.0 to 8.0V Output Voltage 35A Max Current Output Modular Battery Platform Two 18650 Battery Operation Sold Separately Magnetized Battery Door M VV Chipset No Screen Display Potentiometer Controlled Reverse Polarity/Atomizer Short/Low Voltage/Overheat/Over Current Protection Spring Loaded Contacts LED Battery Life Indicator Light Single Oversized Firing Button Zinc Alloy Construction Stainless Steel 510 Thread Point Spring Loaded Connection
Product Dimensions: 91mm by 51mm by 24mm
Product Includes: One Dovpo M VV 300W Box Mod User Manual and Warning Card
Also available in our vape shop at Gloucester
Advanced User Item. Use at Your Own Risk!
Mechanical Mods Disclaimer Due to the nature of these products there’s no warranty. Mechanical Mods are for experienced vapers, that are aware of how to use unregulated devices. It requires technical knowledge in order to use properly. Before purchasing a mech mod we suggest you look at mech mod Blogs or videos. Do your research so that you are aware and confident of the use of a Mechanical Mod. This is because
Mechanical Mods means they cannot regulate voltage output. IF YOU STACK BATTERIES, ie put more that one battery in a mechanical MOD, YOU RUN A VERY HIGH RISK OF CAUSING YOUR MECHANICAL MOD TO CATCH ON FIRE OR EXPLODE! Again DO NOT stack batteries in any mechanical MOD, ever!
Anytime you run low ohm applications (anything under 1 ohm is considered low ohm) please run a very high quality battery that is rated for atleast 30amps. If you run a low amp battery (anything under a 30amp rating) the battery will discharge too many amps, will overheat, vent, and possibly explode or catch on fire. ONLY run low ohm devices with the proper high amp batteries!!! Your contacts must be properly adjusted to make sure you mod is working properly
Contacts must be cleaned if you’re not getting a strong hit
Must make sure mod is locked so it doesn’t auto fire
Whatever RDA or Tank you’re using must make sure you’re using the right type of battery.
Need to be aware of voltage level in battery if battery is exhausted you run the risk of messing up your mod.